In order to improve production efficiency, some details may be overlooked, such as material deviation and slip issues during the operation of the Kaiping machine. How to solve these problems? Let's take a look at the reasons for the deviation of the Kaiping machine during operation.
1.The feeding machine and the leveling machine are not on the same plane and need to be reinstalled.
2.When this problem is found at the opening of the thin plate,the deviation can be corrected by adjusting the position of the coil on the unwinding machine.
3.The pressure on both sides of the roller of the Kaiping machine is unbalanced.It is necessary to remove the lighter side chain and lift the heavier side,or remove the heavier side chain and press the lighter side.
4.The center of the correction wheel does not coincide with the center of the original roll unwinding direction.When the thick plate is opened,the clamping force of the correction wheel can prevent the steel plate from deviating.But when the Kaiping thin plate is opened,the clamping force of the steel plate has exceeded the yield strength of the steel plate,causing slight deformation of the steel plate edge,resulting in deviation phenomenon.The thinner the plate,the more obvious this phenomenon becomes.
If materials are not detected in a timely manner during machining in Kaiping,quality problems can also occur,so it is important to pay more attention to details.For more related questions,please follow our website.
Editor:xxskr
Language
