As the saying goes,'Reading a hundred times reveals its meaning.'The same goes for machine operation.Only by memorizing the basic knowledge and operating principles of machines in books can one operate them with ease.The same applies to the tension controller of Kaiping Line.To proficiently operate the tension controller,one must master its basic types and composition types.
The main types of tension controllers for Kaiping Line are:
The tension control of the tension controller refers to the ability to control the tension of the material belt during transportation on the equipment.
This control maintains any operating speed of the machine,including acceleration,deceleration,and uniform speed.Even in emergency parking situations,it has the ability to ensure that the conveyor belt is not damaged at all.Tension controllers are basically divided into three categories:manual tension controllers,pulse type taper tension controllers,and fully automatic tension controllers.
The basic composition of the tension controller for Kaiping Line:
A typical tension control system mainly consists of a tension controller and a tension reader.
Composed of magnetic powder brake and clutch.According to the loop,it can be divided into open-loop and closed-loop control systems;According to the monitoring methods for different rolls.
The stability of tension control is directly related to the quality of the slitting products on the Kaiping line.If the tension is insufficient,the raw materials will drift during operation,resulting in wrinkling of the finished paper after slitting and rewinding;If the tension is too high,the raw materials are easily pulled apart,causing an increase in the number of broken ends in the finished paper after slitting and rewinding.
Language
